All humanoid robots
Cognitive humanoidExpected availability at the end of 2026

NEURA 4NE1

NR
NEURA Robotics

Germany · Reviewed 2026-10-11

4NE1 is NEURA’s humanoid family. This record uses the Gen 3.5 technical sheet and reservation information published in 2026.

Published offer

Manufacturer estimates published; final quotation required

Availability: Expected availability at the end of 2026

01 / At a glance

Understanding NEURA 4NE1

Height
180 cm for Gen 3.5
Weight
80 kg for Gen 3.5
Release
2026 announcement of Gen 3.5

Intended applications

Industrial assistance, service tasks and cognitive robotics research

IndustrialServiceResearch

02 / Hardware profile

NEURA 4NE1 specifications

Category
Cognitive humanoid
Commercial status
Gen 3.5 reservation stage
Availability
Expected availability at the end of 2026
Released
2026 announcement of Gen 3.5
Country of origin
Germany
Height
180 cm for Gen 3.5
Weight
80 kg for Gen 3.5
Target markets
Industrial, Service, Research
Use cases
Industrial assistance, service tasks and cognitive robotics research

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

NEURA estimates €98,000 per unit for 1–19 units or €60,000 for 20 or more, excluding tax and shipping. The €100 refundable reservation payment is credited toward a later purchase. Confirm the final price and delivery terms with NEURA.

Contact NEURA Robotics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

NEURA 4NE1 engineering analysis

What does the 4NE1 Gen 3.5 data sheet establish for a buyer?

NEURA Robotics describes 4NE1 as a humanoid family with a published generation-specific configuration. Categorical terms such as cognitive do not specify hand force, perception latency or independently completed tasks. A procurement comparison must retain the Gen 3.5 edition named by the manufacturer and identify whether a displayed reservation applies to complete hardware, an evaluation kit or a later delivery program. Software access can also be restricted by contract.

Configuration and hardware details

01

NEURA 4NE1 Gen 3.5 and Gen 4 require separate specifications

NEURA's reservation page describes 4NE1 Gen 3.5 and its stated developer interfaces, while the manufacturer product overview also introduces Gen 4 with a new body and its NEURON AI system. The catalog's 180 cm and 80 kg record and reservation-era commercial terms should stay labeled by generation. No single table should quietly mix the Gen 3.5 price with a Gen 4 engineering claim.

Before making a purchase decision, request a quotation that identifies which generation, hands, tool interfaces and software permissions will ship. The Gen 3.5 reservation page distinguishes estimated unit cost from a refundable reservation fee; neither guarantees delivery timing or a completed field deployment. For hands-on research, ask whether the Python and ROS 2 interfaces in the retained Gen 3.5 material continue unchanged on Gen 4.

Specification notes

The Gen 3.5 sheet lists 180 cm and 80 kg. It gives hand articulation separately and does not establish a whole-body DoF total. NEURA’s third generation was announced in June 2025; Gen 3.5 appeared in its January 2026 CES material. The reservation page expects availability at the end of 2026 and estimates €98,000 per unit for 1–19 units or €60,000 for 20 or more, excluding tax and shipping. The €100 reservation payment is credited toward a later purchase and is not the robot price. The retained catalog image illustrates the family and does not establish this hardware revision.

Hands-on technical guide

NEURA 4NE1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Expected availability at the end of 2026. Ask NEURA Robotics for the reservation terms, delivery region, refund policy, exact hardware edition and written software/support entitlement before paying.
Software and equipment
Request NEURA's Gen 3.5 commissioning software, operator account, supported interface and developer entitlement as part of the reservation. A general downloadable whole-body SDK is not established by the retained product record.

NEURA 4NE1 workflow

  1. 01Order / accessNEURA 4NE1
  2. 02SoftwareVersion-matched tools
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Request NEURA's Gen 3.5 commissioning software, operator account, supported interface and developer entitlement as part of the reservation. A general downloadable whole-body SDK is not established by the retained product record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Reserve Gen 3.5 only after confirming delivery and exact hand option. For the first acceptance test, request unloaded arm movement and a supervised low-speed locomotion demonstration under NEURA's supplied controller.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

Community ratings

NEURA 4NE1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

NEURA 4NE1 sources

NEURA’s Gen 3.5 datasheet and reservation page were checked on 11 October 2026. The sheet identifies version V6 dated 2 January 2026. No whole-body DoF total was established.

  • NEURA 4NE1 Gen 3.5 datasheet V6, 2 January 2026 (manufacturer)
  • NEURA 4NE1 Gen 3.5 reservation and estimated prices (manufacturer)