All humanoid robots
Industrial humanoidDigit 5 early access expected in H1 2027

Agility Robotics Digit

AR
Agility Robotics

United States · Reviewed 2026-10-11

Digit is Agility Robotics’ humanoid family, first announced in February 2019. The measurements here describe Digit 5, announced in September 2026, with initial access expected in 2027.

Published offer

Price on request

Availability: Digit 5 early access expected in H1 2027

01 / At a glance

Understanding Agility Robotics Digit

Height
181 cm for Digit 5
Weight
129 kg for Digit 5
Release
2019 family debut; Digit 5 announced in 2026

Intended applications

Warehouse tote handling, logistics and industrial material movement

LogisticsManufacturing

02 / Hardware profile

Agility Robotics Digit specifications

Category
Industrial humanoid
Commercial status
Commercial Digit 4; Digit 5 announced
Availability
Digit 5 early access expected in H1 2027
Released
2019 family debut; Digit 5 announced in 2026
Country of origin
United States
Height
181 cm for Digit 5
Weight
129 kg for Digit 5
Target markets
Logistics, Manufacturing
Use cases
Warehouse tote handling, logistics and industrial material movement

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Agility Robotics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Agility Robotics Digit engineering analysis

What changes when a buyer requests Digit 5 rather than an earlier Digit?

Agility introduced Digit 5 in September 2026 after deploying earlier versions in logistics settings. The company lists a 23 kg payload, a 2.2 m reach and a work/shift figure defined by charging and deployment conditions. Those figures belong to Digit 5 and should not be attached to footage of an older Digit 4 robot. End-effector choices, human proximity safeguards and workflow integration are part of the actual procurement decision.

Hardware architecture and real-task limits

Why warehouse picking requires more than walking

Agility's Digit is designed for repetitive material movement in human-built logistics spaces. The relevant task is often transporting or transferring standardized totes between defined stations. Its ability to walk through an aisle is one part of the cycle; the robot must also localize at the station, orient its grippers, lift within specified limits and coordinate with other machinery.

For a fair operational trial, count successful tote transfers per hour, time waiting for conveyors, failed grasps, manual resets and charging interruptions. Record aisle geometry and payload instead of treating a short walking video as evidence of production throughput.

What to ask about a factory deployment

A deployment description should name the Digit hardware revision, the software used for fleet supervision and the scope of the customer's workflow. Ask whether an operator teleoperated any movements and how the system responds to a misplaced tote or blocked station. Distinguish an installed demonstration cell from a system accepted for continuous shifts.

Warehouse managers should document clearance, pedestrian separation, charging access and safety responsibilities with their existing mobile-robot traffic rules. Repeated successful motion in an empty aisle does not settle traffic behavior around real workers.

Configuration and hardware details

01

Digit 5 cannot inherit earlier Digit warehouse results

The retained entry describes Digit 5 announced in September 2026 while identifying commercial activity with the earlier Digit 4. Agility Robotics' material emphasizes the newer generation's configuration, but a customer deployment, a cycle-time figure or a safety trial from Digit 4 must retain its generation label. The catalog's 181 cm height and 129 kg mass refer to its recorded variant, not every Digit released since 2019.

A warehouse buyer needs to know the gripper and tote used, line-side transfer requirements and the conditions of the claimed cooperative operation. Evaluate how a unit behaves when a worker blocks its route or a tote is absent, recording both safety stops and useful work completed. An announced next-generation platform does not prove that all installed fleets were already upgraded.

Specification notes

The 2019 date marks the family debut. Digit 5 was announced on 15 September 2026 at 181 cm and 129 kg, with 22.7 kg repeated lifting, 90 minutes of runtime, 9 minutes of charging and 2.2 m vertical reach. Agility expects initial access in the first half of 2027 and general availability by the end of 2027. Those dates are plans, and the specifications do not describe the original 2019 robot. The retained catalog image illustrates the family and does not establish this hardware revision.

Hands-on technical guide

Digit: acceptance testing a tote transfer in a warehouse

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Enterprise deployment or early access; confirm the exact Digit generation, service arrangement and integration scope.
Software and equipment
Supplier-provided fleet and site integration stack, tote stations, test workflow, stop controls and a trained site operator.

Agility Robotics Digit workflow

  1. 01Warehouse taskTote request
  2. 02Fleet interfaceJob dispatch
  3. 03DigitNavigate / grasp / carry
  4. 04DestinationConfirm placement
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Specify the purchase scope

    Request an installed-workcell quote covering robot generation, charging, maintenance, fleet access and integration.

  2. 02

    Map the trial

    Choose one tote station and destination. Define tote presentation, weight range and exclusion zones in the supplier's site commissioning process.

  3. 03

    Test an unloaded route

    Use the supplier's approved trial controls with an operator nearby. Verify site stop behavior before carrying an object.

  4. 04

    Run one transfer

    Record task acceptance, grasp, travel and placement. Record any human reset or failed pickup as an unsuccessful autonomous cycle.

  5. 05

    Measure repeatability

    Repeat under controlled changes such as tote placement only after the baseline is stable.

  6. 06

    Firmware and software update

    Record the installed hardware configuration and firmware/SDK versions. Obtain the matching approved update from Agility Robotics, save configuration and logs, check rollback and power requirements, and follow the manufacturer’s installation procedure. Verify the safe stop and repeat the first test before returning to normal operation.

  7. 07

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Robot repeatedly fails pickup
Check tote pose and station presentation before adjusting the workflow.
Job is dispatched but not completed
Distinguish fleet task acknowledgement from confirmed placement; inspect integration logs with the supplier.

Capabilities and limits

The public sources do not establish an open SDK with runnable actuator-level instructions for Digit. Do not invent ROS topics or running and dance commands.

05 / Comparable models

Compare Agility Robotics Digit with similar robots

Catalog records with their original source dates
FieldAgility Robotics DigitApptronik ApolloBoston Dynamics Atlas
Height181 cm for Digit 5172 cm for original Apollo190 cm
Mass129 kg for Digit 572.6 kg for original Apollo90 kg
Recorded degrees of freedomNot disclosed in the retained sourcesNot stated in the checked Apptronik Apollo sources56
Source date in record2026-10-112026-10-072026-10-07
Product sourceAgility Robotics Digit documentationApptronik Apollo documentationBoston Dynamics Atlas documentation

Agility Robotics Digit is recorded as 9 cm taller than Apptronik Apollo.

Agility Robotics Digit is recorded as 9 cm shorter than Boston Dynamics Atlas.

Community ratings

Agility Robotics Digit Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Agility Robotics Digit sources

Agility’s family history and September 2026 Digit 5 release were checked on 11 October 2026. The measurements are Digit 5 specifications; the reported operating deployments concern Digit 4.

  • Agility Digit 5 announcement, 15 September 2026 (manufacturer)
  • Agility and Ford announcement confirming the February 2019 family debut (manufacturer)