Purchase offer · Market not specified
$37,990 for Master Edu
Offer checked
- Taxes included
- Not stated
- Shipping included
- Not stated
United States · Reviewed 2026-10-11
FF Master is a compact humanoid range. This record uses the current Master Edu listing, with a 131 cm body and visual programming support. Its app and several announced software features are still in development.
Published offer
$37,990 for Master Edu
Availability: Master Edu order listing available; confirm variant and delivery timing
01 / At a glance
Master Edu education, research and programmed interactions; future OTA features are not treated as delivered capabilities
02 / Hardware profile
03 / Pricing and purchasing
Purchase offer · Market not specified
Offer checked
04 / Technical analysis
The retained FF Master entry uses a 131 cm education configuration with visual sensing. An educational robot should provide documented APIs, safe reset procedures and reliable actuator replacement support. Demonstration poses cannot establish that a student can modify the gait policy or collect synchronized sensor data. Do not assume the development rights of Master Edu apply to every Master option.
01
FF Master is a compact commercial range, and this catalog entry specifically identifies the Master Edu configuration with a 131 cm body and 25 degrees of freedom. Its product listing offers programming access and demonstration functions, but a classroom needs to distinguish high-level animations from permission to command independent joints. The exact edition must remain attached to published performance and price claims.
Before adopting a course built for Master Edu, have students read the joint-state API, record firmware version and demonstrate a protected slow arm command. Check the included vision and compute package instead of assuming it matches the company's full-size Futurist models. The current listing price does not establish classroom maintenance costs, spare actuators or software-support duration.
Hands-on technical guide
Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.
Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from FF EAI Robotics. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.
Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.
Specify Master Edu and documented developer entitlement; test an approved educational program before adding planned OTA skills.
Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.
Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.
The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.
05 / Comparable models
| Field | FF Master | AgiBot X2 | FF Master Mini |
|---|---|---|---|
| Height | 131 cm | 131 cm | 95 cm |
| Mass | 35 kg | Approx. 35 kg for X2 | 19.5 kg |
| Recorded degrees of freedom | 25 for Master Edu, excluding hands | 25 for X2; 30 for X2 Ultra | 22 |
| Source date in record | 2026-10-11 | 2026-10-07 | 2026-09-20 |
| Product source | FF Master documentation | AgiBot X2 documentation | FF Master Mini documentation |
FF Master and AgiBot X2 have the same recorded height of 131 cm.
FF Master is recorded as 36 cm taller than FF Master Mini.
Community ratings
Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.
—
No published reviews yet
Be the first to submit hands-on feedback for moderation.
06 / References
The October 2026 shop page opens on Master Edu. Recorded mass, height, joint count and price belong to that variant. The 25-DoF count excludes hands. This page does not establish identical specifications for Master Ultra or other versions.
Continue browsing