All humanoid robots
Industrial humanoidContact company; first series expected in H1 2027

Wandercraft Calvin-40

W
Wandercraft

France · Reviewed 2026-10-11

Calvin-40 is Wandercraft’s industrial humanoid, introduced with Renault in June 2025. Wandercraft reports use at Renault Douai and expects first series deliveries in the first half of 2027.

Published offer

No public price; first series expected in H1 2027

Availability: Contact company; first series expected in H1 2027

01 / At a glance

Understanding Wandercraft Calvin-40

Release
2025 announcement; first series expected in H1 2027

Intended applications

Industrial handling and manufacturing tasks

IndustrialManufacturing

02 / Hardware profile

Wandercraft Calvin-40 specifications

Category
Industrial humanoid
Commercial status
Development with manufacturer-reported factory use
Availability
Contact company; first series expected in H1 2027
Released
2025 announcement; first series expected in H1 2027
Country of origin
France
Target markets
Industrial, Manufacturing
Use cases
Industrial handling and manufacturing tasks

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Wandercraft for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Wandercraft Calvin-40 engineering analysis

Which factory measurements would validate Calvin-40's Renault use case?

Wandercraft introduced Calvin-40 for industrial work alongside Renault and has described work at its Douai plant. That setting provides a concrete environment for evaluating a biped's transport, tool interaction and required safety procedures. A first customer test is not evidence of hundreds of unattended units in service. The distinction between a public pilot, repeatable production tasks and series deliveries expected later must remain explicit.

Configuration and hardware details

01

Calvin-40's Renault context requires a task description

Wandercraft introduced Calvin-40 for industrial humanoid work, with Renault cited in development and a factory-use context. The relevant question is what task the robot performed, how the parts were supplied and whether it ran under supervised industrial trials or normal production. A manufacturer-reported demonstration or use at a site does not establish independent reliability or a completed commercial rollout.

A factory evaluation should record the part-handling sequence, floor condition, operating hours, accepted transfers, human interventions and any protective stops. This gives more actionable evidence than the label 'in Renault factory' alone. The catalog describes future series production expectations separately from current availability; those forecasts must not be reported as delivered volumes.

Specification notes

The 6 June 2025 announcement establishes the Renault partnership and Calvin programme. Wandercraft’s 2026 timeline reports work on the Douai production line, while its product page expects first series delivery in H1 2027. These statements describe different stages of the programme. Height, body mass and whole-body DoF are not established in the checked sources.

Hands-on technical guide

Wandercraft Calvin-40: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Contact company; first series expected in H1 2027. Request a written quote or order confirmation from Wandercraft for Wandercraft Calvin-40 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Wandercraft. No public installer or SDK is confirmed in this model's catalog record.

Wandercraft Calvin-40 workflow

  1. 01Order / accessWandercraft Calvin-40
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Wandercraft. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Define the first industrial handling station, unit delivery terms, E-stop access, item payload and cycle acceptance before production commitment.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

Community ratings

Wandercraft Calvin-40 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Wandercraft Calvin-40 sources

Wandercraft’s dated launch, product page and company timeline were checked on 11 October 2026. The timeline provides a manufacturer report of factory use; no independent operating log was inspected.

  • Wandercraft Calvin introduction, 6 June 2025 (manufacturer)
  • Wandercraft Calvin product page and delivery schedule (manufacturer)