All humanoid robots
Biped humanoidNot confirmed

AgiBot A2 Ultra

A
AgiBot

China · Reviewed 2026-10-07

A2 Ultra is AGIBOT’s biped for guided visits and public interaction, with a more articulated configuration than A2 Lite.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding AgiBot A2 Ultra

Height
169 cm
Weight
69 kg
DoF / joints
40

Intended applications

Reception, guided visits and demonstrations

02 / Hardware profile

AgiBot A2 Ultra specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
169 cm
Weight
69 kg
Degrees of freedom
40
Use cases
Reception, guided visits and demonstrations

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact AgiBot for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

AgiBot A2 Ultra engineering analysis

Can A2 Ultra guide visitors and react when the tour route changes?

A2 Ultra is presented for guided interaction with more articulation than the Lite version. A guided tour combines speech, body posture, people detection and path management, which are different subsystems. A robot can execute expressive gestures while another program handles navigation. The developer should verify which sensors, language services and operator controls are included in the exact configuration.

Configuration and hardware details

01

Navigation and interaction

The official Ultra page describes autonomous navigation and obstacle avoidance. AGIBOT’s A2 comparison specifies seven joints per arm, LiDAR and depth sensing, with walking speed listed at 1.2 m/s.

02

What to check before comparing

A guided-tour installation needs a mapped route and suitable interaction content as well as a robot. Ask which navigation, connectivity and hand options belong to the offered configuration before using the listed capabilities in a project estimate.

03

The published walking speeds disagree

The main website lists 1.2 m/s for Ultra. The store comparison lists a maximum of 0.8 m/s and daily use at or below 0.6 m/s. These values should not be combined into one verified limit. Ask AGIBOT which revision and operating mode the quote covers.

04

Can A2 Ultra use the full sensor package on a public tour?

A2 Ultra is not A2 Lite with only a different shell. AGIBOT lists 40 degrees of freedom for Ultra with seven-axis arms, six-axis legs, dexterous hands and a two-axis head, plus 3D LiDAR and RGB-D and fisheye imaging. Those components make route perception and pointing interactions plausible hardware goals, yet no independent tour-completion rate follows from their presence. A reviewer should separate route tracking, conversation and actual manipulation into different results.

The product listing also distinguishes a published maximum speed from ordinary use conditions. At an exhibition, a route test needs the narrowest permitted passage, obstacle type, time spent waiting for visitors and number of route re-plans. A guided tour completed on a clear aisle is different from one interrupted by people crossing in front of the robot.

Specification notes

Approximate mass. The published 40-DoF figure follows AGIBOT’s counting convention and includes the configured hand articulation.

Hands-on technical guide

AgiBot A2 Ultra: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from AgiBot for AgiBot A2 Ultra with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record.

AgiBot A2 Ultra workflow

  1. 01Order / accessAgiBot A2 Ultra
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Confirm the reception configuration; validate greeting, guided navigation in the permitted area and a manually supervised stop.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare AgiBot A2 Ultra with similar robots

Catalog records with their original source dates
FieldAgiBot A2 UltraAgiBot A2 LiteDroidUp Xingzhe 2
Height169 cm169 cm170 cm
Mass69 kg63 to 64 kg across official pages32 kg
Recorded degrees of freedom402330
Source date in record2026-10-072026-10-072026-09-20
Product sourceAgiBot A2 Ultra documentationAgiBot A2 Lite documentationDroidUp Xingzhe 2 documentation

AgiBot A2 Ultra and AgiBot A2 Lite have the same recorded height of 169 cm.

AgiBot A2 Ultra is recorded as 1 cm shorter than DroidUp Xingzhe 2.

Community ratings

AgiBot A2 Ultra Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

AgiBot A2 Ultra sources

The main Ultra page and the official store comparison were checked on 7 October 2026. Speed figures differ between those pages. No navigation trial was performed.

  • AgiBot official product source (manufacturer)
  • Official manufacturer image (manufacturer)