All humanoid robots
Biped humanoidNot confirmed

AgiBot X1

A
AgiBot

China · Reviewed 2026-09-20

X1 is AGIBOT’s compact bipedal research platform, presented with an open development ecosystem for embodied AI.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding AgiBot X1

Height
130 cm
Weight
33 kg
DoF / joints
34

Intended applications

Locomotion research, robot learning and education

02 / Hardware profile

AgiBot X1 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
130 cm
Weight
33 kg
Degrees of freedom
34
Use cases
Locomotion research, robot learning and education

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact AgiBot for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

AgiBot X1 engineering analysis

Can X1's development materials reproduce a published biped gait?

X1 is a compact biped research platform described with an open development ecosystem. An accessible repository helps researchers inspect the control model, but the simulator must still match the actuator limits, robot mass and foot geometry of the physical machine. A policy running in simulation is not enough evidence that the robot will stand after a perturbation on real flooring.

Configuration and hardware details

01

A smaller platform for experimentation

The official specification lists a walking speed up to 1 m/s, about two hours of battery operation and a 0.5 kg single-arm load. AGIBOT positions X1 around developing and transferring robot-control policies.

02

What to check before comparing

Its relatively small arm payload matters when selecting manipulation experiments. Check the released software, hardware revision and license for the exact development package rather than treating the phrase open source as a guarantee that every component is included.

03

What researchers need before running a new gait on X1

The compact AGIBOT X1 is described in the catalog as a 130 cm, 33 kg research biped with 34 degrees of freedom. Those numbers help establish the body being discussed, but they do not describe accessible motor-command modes or the safety limits of an experimental gait. A downloadable model or example motion must match the exact revision and motor map used in the lab.

A research team should check which simulation assets, firmware and joint readbacks are available before training a new policy. Measure balance recovery and foot placement under protected, repeatable conditions rather than adopting a video title as a walking-performance score. A published gait result should say if the robot was harnessed and whether control ran on its own computer or an external workstation.

Specification notes

The manufacturer reports 34 active DoF. Runtime and load values are not independent test results.

Hands-on technical guide

AgiBot X1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from AgiBot for AgiBot X1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record.

AgiBot X1 workflow

  1. 01Order / accessAgiBot X1
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Compare one standing-to-step motion with the exact X1 joint mapping and an approved stability controller.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare AgiBot X1 with similar robots

Catalog records with their original source dates
FieldAgiBot X1Unitree G1Galbot ET1
Height130 cm132 cm125 cm
Mass33 kgAbout 35 kg with battery for base G132 kg
Recorded degrees of freedom3423 for base G1; 23–43 for G1 EDU26 Standard; 38 Pro/Flagship including hands
Source date in record2026-09-202026-10-112026-09-20
Product sourceAgiBot X1 documentationUnitree G1 documentationGalbot ET1 documentation

AgiBot X1 is recorded as 2 cm shorter than Unitree G1.

AgiBot X1 is recorded as 5 cm taller than Galbot ET1.

Community ratings

AgiBot X1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

AgiBot X1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • AgiBot official product source (manufacturer)
  • Official manufacturer image (manufacturer)