All humanoid robots
Biped humanoidNot confirmed

EngineAI SE01

E
EngineAI

China · Reviewed 2026-09-20

SE01 is EngineAI’s bipedal platform focused on natural walking and articulated manipulation.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding EngineAI SE01

Intended applications

Locomotion research and humanoid manipulation

02 / Hardware profile

EngineAI SE01 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Use cases
Locomotion research and humanoid manipulation

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact EngineAI for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

EngineAI SE01 engineering analysis

How can SE01's natural gait be evaluated quantitatively?

SE01 is presented around articulated walking and whole-body movement. Describing a gait as natural is subjective unless the test includes measurable step length, cadence, lateral torso movement and recovery behavior. Robot leg proportions and joint limits influence its walking appearance, while the ability to carry objects adds another balance task. Video smoothness alone cannot establish energy efficiency or resistance to disturbances.

Configuration and hardware details

01

Walking and perception

EngineAI describes an end-to-end control approach for straight-legged walking. The page presents dexterous hands, depth vision and inertial sensing, with interfaces for integrating perception and robot-control software.

02

What to check before comparing

The public overview is less specific than EngineAI’s newer configuration tables. This entry therefore does not inherit PM01 or T800 measurements. For a research purchase, request the SE01 revision, actuator limits and supplied software interfaces together.

03

How to measure SE01's advertised natural gait

SE01 is presented as a full-size biped with walking motion intended to look natural. To assess that claim technically, record the body trajectory, steps, foot-ground contacts and use of manual control over an unedited route. A natural appearance does not specify impact forces, repeatability or whether a fast turnaround was rehearsed.

An engineering comparison should maintain the same floor and planned path over repeated runs, then vary direction, stop and restart conditions. Keep video synchronized with joint and inertial logs where available. Do not import PM01's dimension, motor torque or compute options into SE01's profile: EngineAI treats these as distinct products and those figures may not describe SE01.

Specification notes

Height, mass and full-body DoF were not established from the checked SE01 overview.

Hands-on technical guide

EngineAI SE01: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from EngineAI for EngineAI SE01 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from EngineAI. No public installer or SDK is confirmed in this model's catalog record.

EngineAI SE01 workflow

  1. 01Order / accessEngineAI SE01
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from EngineAI. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Request an SE01-specific software build and locomotion acceptance demonstration; do not install PM01 or T800 policies on SE01.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare EngineAI SE01 with similar robots

Catalog records with their original source dates
FieldEngineAI SE01EngineAI PM01EngineAI T800
HeightNot disclosed in the retained sources140 cm173 cm
MassNot disclosed in the retained sources44.5 kg75–85 kg, depending on edition
Recorded degrees of freedomNot disclosed in the retained sources2425 Base/Development; 46 Max including hands
Source date in record2026-09-202026-09-202026-09-20
Product sourceEngineAI SE01 documentationEngineAI PM01 documentationEngineAI T800 documentation

Community ratings

EngineAI SE01 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

EngineAI SE01 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • EngineAI official product source (manufacturer)
  • Official manufacturer image (manufacturer)