All humanoid robots
Biped humanoidNot confirmed

EngineAI PM01

E
EngineAI

China · Reviewed 2026-09-20

PM01 is EngineAI’s compact development humanoid. The current specification table describes Education and Navigation editions for 2026.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding EngineAI PM01

Height
140 cm
Weight
44.5 kg
DoF / joints
24

Intended applications

Education, locomotion development and navigation research

02 / Hardware profile

EngineAI PM01 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
140 cm
Weight
44.5 kg
Degrees of freedom
24
Use cases
Education, locomotion development and navigation research

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact EngineAI for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

EngineAI PM01 engineering analysis

Which PM01 edition is appropriate for navigation research?

EngineAI distinguishes development configurations for PM01. A navigation researcher must verify the included vision sensors, compute module and interface permissions, rather than assuming that a public performance edition supplies the same sensors as an education version. A compact humanoid also introduces foot-placement uncertainty when it changes heading on rough or slippery flooring.

Configuration and hardware details

01

The 2026 configuration matters

Both current editions are listed with 24 joint motors and a mass of approximately 44.5 kg including the battery. EngineAI specifies two stereo cameras and a Jetson Orin NX 16 GB module. The Navigation edition adds 3D LiDAR.

02

What to check before comparing

Older PM01 headlines on the same page mention different torque and articulation figures. The table below follows the explicitly labelled 2026 editions. Confirm the delivery revision because a PM01 name alone does not identify the sensor package.

03

EngineAI PM01 education and navigation editions need separate sensor inventories

EngineAI's current product documentation distinguishes PM01 Education from PM01 Navigation configurations. The retained catalog lists a 140 cm, roughly 44.5 kg, 24-DoF platform, while the manufacturer's English development guide reports approximately 43 kg for a documented education configuration. Those values are source- and revision-specific, not numbers to combine into a single universal weight.

For a researcher selecting navigation hardware, confirm whether 3D LiDAR and depth sensing are included and which control examples support the chosen edition. A two-camera setup is not interchangeable with a LiDAR-equipped configuration in a map-based navigation test. List hardware revision, battery and compute module with each reported result, because PM01 development documentation and the sales specification can differ by edition.

Specification notes

2026 Education and Navigation editions. The approximate two-hour runtime is manufacturer-reported.

Hands-on technical guide

EngineAI PM01: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from EngineAI for EngineAI PM01 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
EngineAI robot description assets, engineai_rl_lab and compatible Isaac Lab release. Native SDK support depends on PM01 revision.

EngineAI PM01 workflow

  1. 01Order / accessEngineAI PM01
  2. 02SoftwareVersion-matched tools
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    EngineAI robot description assets, engineai_rl_lab and compatible Isaac Lab release. Native SDK support depends on PM01 revision. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Use the EngineAI model assets for PM01 and a whole-body tracking task in Isaac Lab first; confirm PM01 edition before any hardware SDK.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Commands and code

Use simulation or read-only checks first. On a real robot, use only the compatible documented interface, trained supervision and approved stop procedure. Replace illustrative network addresses and interfaces with your own.

Obtain the documented development files

git clone https://github.com/engineai-robotics/engineai_robotics_description.git
git clone https://github.com/engineai-robotics/engineai_rl_lab.git
# Use the supported Isaac Lab release specified by engineai_rl_lab.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare EngineAI PM01 with similar robots

Catalog records with their original source dates
FieldEngineAI PM01Noetix Robotics E1MagicLab MagicBot Z1
Height140 cm140 cm136.9 cm
Mass44.5 kg40 kgApproximately 40 kg or more, including battery
Recorded degrees of freedom2423–28, depending on options24 basic; up to 50 with options
Source date in record2026-09-202026-09-202026-09-20
Product sourceEngineAI PM01 documentationNoetix Robotics E1 documentationMagicLab MagicBot Z1 documentation

EngineAI PM01 and Noetix Robotics E1 have the same recorded height of 140 cm.

EngineAI PM01 is recorded as 3.1 cm taller than MagicLab MagicBot Z1.

Community ratings

EngineAI PM01 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

EngineAI PM01 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • EngineAI official product source (manufacturer)
  • Official manufacturer image (manufacturer)