All humanoid robots
Wheeled humanoidNot confirmed

Galbot S1

G
Galbot

China · Reviewed 2026-09-20

Galbot S1 is a heavy mobile dual-arm platform for industrial transport, loading and warehouse handling.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding Galbot S1

Height
179.3 cm maximum
Weight
320 kg
DoF / joints
17 listed neck, arm and lift axes; base/end-effectors separate

Intended applications

Heavy material handling and warehouse transfer

02 / Hardware profile

Galbot S1 specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
179.3 cm maximum
Weight
320 kg
Degrees of freedom
17 listed neck, arm and lift axes; base/end-effectors separate
Use cases
Heavy material handling and warehouse transfer

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Galbot for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Galbot S1 engineering analysis

What determines Galbot S1's industrial loading throughput?

Galbot S1 is presented as a heavy wheeled dual-arm platform for transport and loading. Throughput depends on the interface to conveyors, part presentation, base travel time and the controller's recovery from missed objects. Rated payload alone does not describe the amount of work a robot completes over a shift. A wide or tall carried item can alter corner clearance and navigation margins.

Configuration and hardware details

01

Reach and load together

Galbot lists a combined two-arm maximum load of 50 kg and a lifting column with 750 mm travel. Its specification describes seven joints per arm, two in the neck and one for lift, plus a four-wheel steering base.

02

What to check before comparing

The 50 kg figure applies to the two arms together. It is not a per-arm rating. Continuous-operation marketing also relies on battery replacement; the same table lists eight hours of operation on a full charge.

03

S1's heavy mobile structure changes safety and throughput calculations

Galbot S1 is a larger wheeled dual-arm industrial platform; the catalog records a 320 kg robot. That system mass matters for site access, floor loading and stopping behavior, independently of what its arms can carry. A demonstration of lifting an object does not specify the operating envelope around workers or whether a complete industrial shift could be maintained.

For loading work, require the manufacturer to state permissible payload at the actual horizontal reach, docking accuracy near equipment and protective controls. Measure useful parts moved per shift while counting charging, machine waits and operator recovery. A site's floor and route may make a wheeled S1 suitable where a biped is unnecessary, but the larger footprint must be checked before procurement.

Specification notes

Maximum height is 179.3 cm. Neck, arms and lift total 17 listed axes, with chassis and end-effector articulation outside that subtotal.

Hands-on technical guide

Galbot S1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from Galbot for Galbot S1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Galbot. No public installer or SDK is confirmed in this model's catalog record.

Galbot S1 workflow

  1. 01Order / accessGalbot S1
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Galbot. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Specify actual load mass, dimensions and receiving station; verify the approved loaded stopping distance and handoff at low speed.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare Galbot S1 with similar robots

Catalog records with their original source dates
FieldGalbot S1Galbot G1
Height179.3 cm maximum173 cm maximum
Mass320 kg92.5 kg
Recorded degrees of freedom17 listed neck, arm and lift axes; base/end-effectors separate21, excluding chassis and end-effectors
Source date in record2026-09-202026-09-20
Product sourceGalbot S1 documentationGalbot G1 documentation

Community ratings

Galbot S1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Galbot S1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • Galbot official product source (manufacturer)
  • Official manufacturer image (manufacturer)

Continue browsing

Related humanoid robots

All models