All humanoid robots
Biped humanoidNot confirmed

Leju Robotics Kuavo 4Pro

LR
Leju Robotics

China · Reviewed 2026-09-20

KUAVO 4Pro is Leju’s full-size biped for research, demonstration capture and public-facing applications.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding Leju Robotics Kuavo 4Pro

Height
166 cm
Weight
55 kg
DoF / joints
22, 30 or 40, depending on configuration

Intended applications

Imitation learning, guided visits and research

02 / Hardware profile

Leju Robotics Kuavo 4Pro specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
166 cm
Weight
55 kg
Degrees of freedom
22, 30 or 40, depending on configuration
Use cases
Imitation learning, guided visits and research

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Leju Robotics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Leju Robotics Kuavo 4Pro engineering analysis

What should a KUAVO 4Pro training dataset disclose?

Leju presents KUAVO 4Pro for biped development and collecting research demonstrations. To reproduce a manipulation policy, a laboratory needs the camera arrangement, joint names, gripper control interface and timestamped observations. A dataset from one hardware revision may include tool offsets that no longer match a new hand or actuator. The training setup should identify manual guidance and external tracking systems.

Configuration and hardware details

01

A published range of hardware configurations

Leju’s illustrated specification gives a height of 166 cm and approximate mass of 55 kg. It lists 22, 30 or 40 full-body DoF depending on configuration, with five- or seven-joint arms. The page describes stereo vision, LiDAR and battery changes without powering down.

02

What to check before comparing

The dexterous-hand diagram distinguishes six DoF from ten moving joints. Those quantities should not be added indiscriminately to the body total. Confirm the configured hands and arm version when comparing the platform or reproducing a recorded manipulation task.

03

KUAVO 4Pro is not the same training target as later KUAVO editions

Leju KUAVO 4Pro is retained as a full-size biped, approximately 166 cm and 55 kg, with published configuration ranges rather than one universal hardware package. Later KUAVO releases appear under the same developer, but differences in hands, joints and camera placement can make a policy or simulation asset edition-specific.

A laboratory collecting motion demonstrations should record the actual hardware revision, controller mode, joint-state sampling rate and hand option. Test a fixed reach before adding locomotion, and report whether the human demonstrated an action directly or selected it through software. If a model was trained on KUAVO 5, do not attribute its manipulation results to KUAVO 4Pro without an explicit cross-version experiment.

Specification notes

The numerical specifications come from the KUAVO 4Pro table. They do not describe KUAVO 5 or 5-W.

Hands-on technical guide

Leju Robotics Kuavo 4Pro: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from Leju Robotics for Leju Robotics Kuavo 4Pro with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Leju Robotics. No public installer or SDK is confirmed in this model's catalog record.

Leju Robotics Kuavo 4Pro workflow

  1. 01Order / accessLeju Robotics Kuavo 4Pro
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from Leju Robotics. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Record one controlled imitation-learning demonstration with the 4Pro joint and hand configuration; test data playback in simulation.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare Leju Robotics Kuavo 4Pro with similar robots

Catalog records with their original source dates
FieldLeju Robotics Kuavo 4ProUBTECH Robotics Walker C1AgiBot A2 Lite
Height166 cm164 cm169 cm
Mass55 kg55 kg63 to 64 kg across official pages
Recorded degrees of freedom22, 30 or 40, depending on configuration5323
Source date in record2026-09-202026-09-202026-10-07
Product sourceLeju Robotics Kuavo 4Pro documentationUBTECH Robotics Walker C1 documentationAgiBot A2 Lite documentation

Leju Robotics Kuavo 4Pro is recorded as 2 cm taller than UBTECH Robotics Walker C1.

Leju Robotics Kuavo 4Pro is recorded as 3 cm shorter than AgiBot A2 Lite.

Community ratings

Leju Robotics Kuavo 4Pro Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Leju Robotics Kuavo 4Pro sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • Leju Robotics official product source (manufacturer)
  • Official manufacturer image (manufacturer)