All humanoid robots
Biped humanoidNot confirmed

UBTECH Robotics Walker C1

UR
UBTECH Robotics

China · Reviewed 2026-09-20

Walker C1 is UBTECH’s humanoid for visitor-facing services, including reception, guided visits and event demonstrations.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding UBTECH Robotics Walker C1

Height
164 cm
Weight
55 kg
DoF / joints
53

Intended applications

Reception, guided tours, retail guidance and events

02 / Hardware profile

UBTECH Robotics Walker C1 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
164 cm
Weight
55 kg
Degrees of freedom
53
Use cases
Reception, guided tours, retail guidance and events

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact UBTECH Robotics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

UBTECH Robotics Walker C1 engineering analysis

Can Walker C1 complete a visitor tour without a teleoperator?

Walker C1 is presented for reception, demonstrations and guided events. These jobs require dependable localization, accurate speech prompts and safe interactions in a crowd. A robot may use preplanned gestures, a script for spoken content and a different operator interface for locomotion. A useful deployment profile should separate each of these controls.

Configuration and hardware details

01

Combining a motion library with service content

UBTECH’s current specification image lists 164 cm height, 55 kg mass and 53 DoF. The product page describes a motion library, interfaces for custom applications and multilingual interaction for service settings.

02

What to check before comparing

A successful guided visit depends on the route and the information delivered as well as locomotion. Confirm the language, navigation and custom-motion package for the supplied revision. The page’s service examples do not establish unattended reliability in a crowded venue.

03

A reception demo must show Walker C1 handling interruption

Walker C1 is a full-size UBTECH service-oriented humanoid, with a 164 cm, 55 kg and 53-DoF configuration in the catalog. Greeting, tour guidance and event presentation each depend on timing and safe interaction near people, not just the ability to play stored gestures. A live response should be distinguished from a motion chosen by an operator or a scheduled show script.

For a reception trial, mark the route, test unexpected questions and have visitors cross in front of the robot in an approved setting. Log missed requests, route stops and human takeovers. Ask the manufacturer which C1 interface allows updating approved scripts and which safety mechanisms remain independent of the dialogue service. No public clip supplies an all-day autonomy rate without an observation log.

Specification notes

The dimensions and articulation follow UBTECH’s current Walker C1 specification image.

Hands-on technical guide

UBTECH Robotics Walker C1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from UBTECH Robotics for UBTECH Robotics Walker C1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from UBTECH Robotics. No public installer or SDK is confirmed in this model's catalog record.

UBTECH Robotics Walker C1 workflow

  1. 01Order / accessUBTECH Robotics Walker C1
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from UBTECH Robotics. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Specify a retail route with audience boundaries, then validate greeting, low-speed movement and stop.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare UBTECH Robotics Walker C1 with similar robots

Catalog records with their original source dates
FieldUBTECH Robotics Walker C1Leju Robotics Kuavo 4ProLumos Robotics LUS2
Height164 cm166 cm160 cm
Mass55 kg55 kg57 kg
Recorded degrees of freedom5322, 30 or 40, depending on configuration28
Source date in record2026-09-202026-09-202026-09-20
Product sourceUBTECH Robotics Walker C1 documentationLeju Robotics Kuavo 4Pro documentationLumos Robotics LUS2 documentation

UBTECH Robotics Walker C1 is recorded as 2 cm shorter than Leju Robotics Kuavo 4Pro.

UBTECH Robotics Walker C1 is recorded as 4 cm taller than Lumos Robotics LUS2.

Community ratings

UBTECH Robotics Walker C1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

UBTECH Robotics Walker C1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • UBTECH Robotics official product source (manufacturer)
  • Official manufacturer image (manufacturer)