All humanoid robots
Wheeled humanoidNot confirmed

AgiBot G2

A
AgiBot

China · Reviewed 2026-09-20

G2 is AGIBOT’s manipulation platform for industrial work, combining force control with the company’s embodied-AI software.

Published offer

Price not verified

Availability: Not confirmed

AGIBOT G2 official manufacturer product image

01 / At a glance

Understanding AgiBot G2

Intended applications

Assembly, industrial manipulation and application development

02 / Hardware profile

AgiBot G2 specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Use cases
Assembly, industrial manipulation and application development

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact AgiBot for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

AgiBot G2 engineering analysis

Why does G2's force-controlled manipulation need contact-level benchmarks?

AGIBOT presents G2 for physical interaction in industrial work with force control and embodied-AI software. During insertion or polishing, the controller must regulate tool force and position despite friction and small surface differences. Arm strength alone cannot establish that a robot can avoid damaging a delicate part. Model versions and hand sensors matter because they change what the controller can observe after first contact.

Configuration and hardware details

01

Force control and deployment tools

AGIBOT describes force-controlled operation, an IP42 enclosure rating and deployment tools based on Genie RL. The page also presents conversation, gaze and animated facial responses for interaction.

02

What to check before comparing

The advertised assembly precision needs a defined task, tool and measurement protocol before it can be compared with another robot. The accessible product text does not establish a complete dimensional or joint specification. Those values remain unrecorded here.

03

Treat G2's assembly claim as a measurement to reproduce

AGIBOT's G2 page advertises force-controlled operation and sub-millimeter precision assembly under its stated industrial positioning. That is a manufacturer claim, not a measurement reproduced in this article. A reader should ask what the quoted precision measures: tool-tip repeatability, completed part placement or assembly clearance under contact. Those tests require different reference instruments and error definitions.

A sensible evaluation begins with a named part, known insertion tolerance and an external measurement of accepted assemblies. Log contact-force peaks, attempts, rejected parts, retries and the robot revision. The company also lists IP42 protection for the overall machine; it should not be mistaken for suitability for water exposure or outdoor operation. The official page does not justify inventing a universal production success rate.

Specification notes

IP42 and assembly capabilities are manufacturer claims. A configuration-specific datasheet is still needed for height, mass and total DoF.

Hands-on technical guide

AgiBot G2: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from AgiBot for AgiBot G2 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record.

AgiBot G2 workflow

  1. 01Order / accessAgiBot G2
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from AgiBot. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Define the assembly fixture and tool center point; accept repeated slow insertion in simulation before trying the station.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare AgiBot G2 with similar robots

Catalog records with their original source dates
FieldAgiBot G2AgiBot A2-WAgiBot G1
HeightNot disclosed in the retained sources163 cm130–180 cm, adjustable
MassNot disclosed in the retained sources230 kg150 kg
Recorded degrees of freedomNot disclosed in the retained sources2220, excluding end-effectors
Source date in record2026-09-202026-09-202026-10-07
Product sourceAgiBot G2 documentationAgiBot A2-W documentationAgiBot G1 documentation

Community ratings

AgiBot G2 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

AgiBot G2 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • AgiBot official product source (manufacturer)
  • Official manufacturer image (manufacturer)