All humanoid robots
Wheeled humanoidNot confirmed

Galaxea Dynamics R1 Lite

GD
Galaxea Dynamics

China · Reviewed 2026-09-20

R1 Lite is Galaxea’s mobile data-collection platform with top-mounted arms and a simplified torso arrangement.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding Galaxea Dynamics R1 Lite

Height
128 cm on the dedicated page; revision differs from the family table
DoF / joints
23

Intended applications

Demonstration capture and manipulation training

02 / Hardware profile

Galaxea Dynamics R1 Lite specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
128 cm on the dedicated page; revision differs from the family table
Degrees of freedom
23
Use cases
Demonstration capture and manipulation training

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Galaxea Dynamics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Galaxea Dynamics R1 Lite engineering analysis

When does R1 Lite's simpler torso design become a limitation?

R1 Lite places arms on a mobile data-collection base with a simplified upper-body arrangement. That can be sufficient for tabletop demonstrations, but the reachable workspace and camera viewpoint differ from a more articulated torso. A robot positioned near a low shelf may need base repositioning to reach an object another model could pick with torso movement alone.

Configuration and hardware details

01

A focused teleoperation setup

The dedicated Lite page describes six-joint A1X arms and a three-joint torso. It lists a 0–1.7 m vertical workspace and supports a matching teleoperation device.

02

What to check before comparing

The current Lite page and the older family comparison disagree on dimensions, arm length and computing hardware. The dedicated page lists 128 cm overall height, while the comparison shows 145.5 cm. A single universal height would conceal that revision uncertainty.

03

The simplified R1 Lite torso changes where demonstrations can be collected

Galaxea's R1 Lite uses a wheeled mobile platform and a simplified upper-body arrangement for collecting manipulation demonstrations. The catalog retains 23 degrees of freedom but does not justify copying R1 Pro's arm force sensing or other options into a Lite specification. An arm may reach the same object from fewer base poses when its torso adjustments are reduced.

A dataset team should map reachable positions for the actual hand and camera placement, then identify tasks that need the base to move before grasping. Keep the pose of the base in each episode and record whether an operator moved the robot closer. If a learning result was obtained on an R1 Pro, it should not be attributed to R1 Lite without checking control-interface and sensor differences.

Specification notes

23 total DoF. Confirm the hardware revision for height, compute and payload before ordering.

Hands-on technical guide

Galaxea Dynamics R1 Lite: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from Galaxea Dynamics for Galaxea Dynamics R1 Lite with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Request the R1 Lite release archive, compatible teleoperation devices and data interface from Galaxea. R1 and R1 Pro packages are not interchangeable by assumption.

Galaxea Dynamics R1 Lite workflow

  1. 01Order / accessGalaxea Dynamics R1 Lite
  2. 02SoftwareVersion-matched tools
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Request the R1 Lite release archive, compatible teleoperation devices and data interface from Galaxea. R1 and R1 Pro packages are not interchangeable by assumption. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Request the R1 Lite-specific SDK and recording setup; capture a short demonstration with synchronized wrist cameras and action data.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare Galaxea Dynamics R1 Lite with similar robots

Catalog records with their original source dates
FieldGalaxea Dynamics R1 LiteGalaxea Dynamics R1Galaxea Dynamics R1 Pro
Height128 cm on the dedicated page; revision differs from the family table170 cm170 cm
MassNot disclosed in the retained sourcesNot disclosed in the retained sourcesNot disclosed in the retained sources
Recorded degrees of freedom232426
Source date in record2026-09-202026-09-202026-09-20
Product sourceGalaxea Dynamics R1 Lite documentationGalaxea Dynamics R1 documentationGalaxea Dynamics R1 Pro documentation

Community ratings

Galaxea Dynamics R1 Lite Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Galaxea Dynamics R1 Lite sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • Galaxea Dynamics official product source (manufacturer)
  • Official manufacturer image (manufacturer)