All humanoid robots
Wheeled humanoidNot confirmed

Galaxea Dynamics R1

GD
Galaxea Dynamics

China · Reviewed 2026-09-20

Galaxea R1 is a wheeled dual-arm robot for teleoperation, data collection and manipulation research.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding Galaxea Dynamics R1

Height
170 cm
DoF / joints
24

Intended applications

Teleoperation and embodied-AI research

02 / Hardware profile

Galaxea Dynamics R1 specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
170 cm
Degrees of freedom
24
Use cases
Teleoperation and embodied-AI research

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Galaxea Dynamics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Galaxea Dynamics R1 engineering analysis

How should Galaxea R1 teleoperation data be synchronized?

Galaxea R1 combines a mobile base and dual arms for demonstration collection and physical learning. Camera frames, arm encoder readings and mobile-base odometry must refer to compatible timestamps. Even a modest offset between sensors can make the recorded gripper pose appear displaced from the handled object. A learned policy may then reproduce the wrong motion despite accurate raw data.

Configuration and hardware details

01

Arms, torso and mobile base

The R1 configuration combines two six-joint arms with a four-joint torso and an omnidirectional base. Galaxea describes a floor-to-two-metre workspace and synchronized vision for recording robot interactions.

02

What to check before comparing

The headline advertises a 10 kg dual-arm load, but the comparison table specifies lower R1 arm loads under stated reach conditions. Use the table’s R1 column and obtain a task-specific load envelope before treating the headline as a working rating.

03

Why base motion belongs in an R1 demonstration log

Galaxea R1 is a wheeled dual-arm research platform that can gather teleoperation demonstrations. When a robot rolls closer to a target, its mobile-base pose and arm configuration both affect where the end effector arrives. A dataset with only wrist trajectories can therefore omit the motion that made a grasp possible. The 24-DoF catalogued configuration should be tied to the exact R1 package.

A proper manipulation trial logs mobile-base motion, joint state, camera timestamps and gripper action in the same clock frame. Include teleoperator corrections and unsuccessful pickups. Compare a fixed-base reach against a reach that requires repositioning, reporting base alignment failures separately from finger contact failures. These are proposed tests, not a published task-success benchmark for R1.

Specification notes

24 DoF with the standard grippers. The R1 table lists 2 kg rated and 3.5 kg maximum per arm at 0.5 m.

Hands-on technical guide

Galaxea Dynamics R1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from Galaxea Dynamics for Galaxea Dynamics R1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Galaxea R1 VR teleoperation or autonomous navigation SDK. Request the release archive from Galaxea support for the exact R1 computer and firmware.

Galaxea Dynamics R1 workflow

  1. 01Order / accessGalaxea Dynamics R1
  2. 02SoftwareVersion-matched tools
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Galaxea R1 VR teleoperation or autonomous navigation SDK. Request the release archive from Galaxea support for the exact R1 computer and firmware. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Confirm R1 SDK release and navigation or VR teleoperation entitlement; test wrist camera data and stationary manipulation before base travel.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare Galaxea Dynamics R1 with similar robots

Catalog records with their original source dates
FieldGalaxea Dynamics R1Galaxea Dynamics R1 ProUBTECH Robotics Cruzr S2
Height170 cm170 cm176 cm
MassNot disclosed in the retained sourcesNot disclosed in the retained sourcesNot disclosed in the retained sources
Recorded degrees of freedom242644
Source date in record2026-09-202026-09-202026-09-20
Product sourceGalaxea Dynamics R1 documentationGalaxea Dynamics R1 Pro documentationUBTECH Robotics Cruzr S2 documentation

Galaxea Dynamics R1 and Galaxea Dynamics R1 Pro have the same recorded height of 170 cm.

Galaxea Dynamics R1 is recorded as 6 cm shorter than UBTECH Robotics Cruzr S2.

Community ratings

Galaxea Dynamics R1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Galaxea Dynamics R1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • Galaxea Dynamics official product source (manufacturer)
  • Official manufacturer image (manufacturer)