All humanoid robots
Wheeled humanoidNot confirmed

Galaxea Dynamics R1 Pro

GD
Galaxea Dynamics

China · Reviewed 2026-09-20

R1 Pro is Galaxea’s wheeled manipulation platform with seven-joint arms and force sensing for application development.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding Galaxea Dynamics R1 Pro

Height
170 cm
DoF / joints
26

Intended applications

Manipulation research and industrial application development

02 / Hardware profile

Galaxea Dynamics R1 Pro specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
170 cm
Degrees of freedom
26
Use cases
Manipulation research and industrial application development

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact Galaxea Dynamics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

Galaxea Dynamics R1 Pro engineering analysis

How do the R1 Pro's arm and force sensors affect assembly testing?

Galaxea R1 Pro uses seven-joint arms with force sensing for manipulation development. Redundant arm joints can help avoid collisions and reach around nearby fixtures, while force feedback can inform the controller when a part touches the target. The selected gripper, exact sensor frame and control frequency must still be checked. A smooth free-space arm trajectory gives no measure of safe contact or insertion accuracy.

Configuration and hardware details

01

More arm articulation

Galaxea’s Pro table lists 26 DoF with standard grippers, a four-joint torso and an omnidirectional base. The specified vertical workspace extends from the floor to two metres.

02

What to check before comparing

The Pro page distinguishes a 3.5 kg rated arm load from a 5 kg maximum at 0.62 m. Those conditions matter more than an unqualified dual-arm payload headline. Compare the planned reach and end-effector mass before choosing a configuration.

03

Force sensing changes the errors to measure on R1 Pro

R1 Pro is described with more articulated arms and force sensing than the simpler R1 family members; the retained record lists 26 degrees of freedom. A connector insertion task needs to track contact force, approach pose and the exact point when resistance appears. Position tracking alone may miss the difference between a safe alignment correction and a damaging jam.

For a controlled assembly trial, select a known connector and fixture, log the arm's force signal alongside tool position and mark each insertion as accepted, rejected or interrupted. Compare performance with and without base repositioning if software access permits it. R1 Pro results should not be used as proof that R1 Lite provides the same sensor feedback or controller modes.

Specification notes

The Pro page is the source for this configuration. Body mass is not established in the checked table.

Hands-on technical guide

Galaxea Dynamics R1 Pro: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from Galaxea Dynamics for Galaxea Dynamics R1 Pro with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Galaxea R1 Pro SDK release archive. Request the matching navigation or manipulation interfaces from Galaxea support.

Galaxea Dynamics R1 Pro workflow

  1. 01Order / accessGalaxea Dynamics R1 Pro
  2. 02SoftwareVersion-matched tools
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Galaxea R1 Pro SDK release archive. Request the matching navigation or manipulation interfaces from Galaxea support. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Obtain R1 Pro-specific SDK files and verify the tool configuration; test a slow stationary reach before simultaneous base and arm movement.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare Galaxea Dynamics R1 Pro with similar robots

Catalog records with their original source dates
FieldGalaxea Dynamics R1 ProGalaxea Dynamics R1UBTECH Robotics Cruzr S2
Height170 cm170 cm176 cm
MassNot disclosed in the retained sourcesNot disclosed in the retained sourcesNot disclosed in the retained sources
Recorded degrees of freedom262444
Source date in record2026-09-202026-09-202026-09-20
Product sourceGalaxea Dynamics R1 Pro documentationGalaxea Dynamics R1 documentationUBTECH Robotics Cruzr S2 documentation

Galaxea Dynamics R1 Pro and Galaxea Dynamics R1 have the same recorded height of 170 cm.

Galaxea Dynamics R1 Pro is recorded as 6 cm shorter than UBTECH Robotics Cruzr S2.

Community ratings

Galaxea Dynamics R1 Pro Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

Galaxea Dynamics R1 Pro sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • Galaxea Dynamics official product source (manufacturer)
  • Official manufacturer image (manufacturer)