All humanoid robots
Biped humanoidNot confirmed

MagicLab MagicBot Gen1

M
MagicLab

China · Reviewed 2026-09-20

MagicBot Gen1 is MagicLab’s full-size humanoid for manipulation research and development of industrial or service applications.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding MagicLab MagicBot Gen1

Height
174 cm
Weight
70 kg
DoF / joints
42

Intended applications

Robot learning, manufacturing research and guided interaction

02 / Hardware profile

MagicLab MagicBot Gen1 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
174 cm
Weight
70 kg
Degrees of freedom
42
Use cases
Robot learning, manufacturing research and guided interaction

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact MagicLab for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

MagicLab MagicBot Gen1 engineering analysis

What would establish reliable industrial manipulation with MagicBot Gen1?

MagicBot Gen1 is presented for handling tasks in industrial or service settings. A successful demonstration should identify the installed hands, sensor arrangement, programmed task constraints and operator input. Grasping a rigid object placed at a known location does not predict success with random part orientation or deformable packaging. A full-size biped must also preserve balance while the upper body applies force.

Configuration and hardware details

01

Manipulation and development access

MagicLab lists seven joints per arm and an optional tactile hand. Its SDK exposes both individual-joint control and a higher-level motion controller, alongside sensor and robot-state access.

02

What to check before comparing

The published 15 kg dual-arm load should be read with the chosen grasp and arm posture. MagicLab’s 42-active-DoF headline and optional hand configuration also need to be matched to the exact delivered robot before comparing joint totals.

03

The 42-DoF MagicBot Gen1 needs a precise task-level report

MagicLab lists MagicBot Gen1 as a full-size humanoid; the retained catalog gives a 174 cm, 70 kg body with 42 degrees of freedom. The extra articulation may support more reach and hand poses, but none of those numbers establishes success on a factory insertion or sorting task. The exact installed hands and controller revision should be identified before interpreting demonstrations.

For a manipulation assessment, record a defined object set, the number of first-attempt successful grasps and the corrective steps the robot took after failures. Run static and mobile versions separately to reveal balance demands. The manufacturer product page documents the platform, but it does not establish independently measured industrial uptime or a universal payload over the full reach envelope.

Specification notes

The manufacturer lists 42 active DoF and an approximate 70 kg mass. Hands are configurable.

Hands-on technical guide

MagicLab MagicBot Gen1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from MagicLab for MagicLab MagicBot Gen1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from MagicLab. No public installer or SDK is confirmed in this model's catalog record.

MagicLab MagicBot Gen1 workflow

  1. 01Order / accessMagicLab MagicBot Gen1
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from MagicLab. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Request the Gen1-specific SDK and a short supervised manipulation or data capture exercise with a known item.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare MagicLab MagicBot Gen1 with similar robots

Catalog records with their original source dates
FieldMagicLab MagicBot Gen1AgiBot A3EngineAI T800
Height174 cm173 cm173 cm
Mass70 kg55 kg75–85 kg, depending on edition
Recorded degrees of freedom4231 active DoF25 Base/Development; 46 Max including hands
Source date in record2026-09-202026-10-072026-09-20
Product sourceMagicLab MagicBot Gen1 documentationAgiBot A3 documentationEngineAI T800 documentation

MagicLab MagicBot Gen1 is recorded as 1 cm taller than AgiBot A3.

MagicLab MagicBot Gen1 is recorded as 1 cm taller than EngineAI T800.

Community ratings

MagicLab MagicBot Gen1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

MagicLab MagicBot Gen1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • MagicLab official product source (manufacturer)
  • Official manufacturer image (manufacturer)