All humanoid robots
Biped humanoidNot confirmed

MagicLab MagicBot X1

M
MagicLab

China · Reviewed 2026-09-20

MagicBot X1 is MagicLab’s full-size humanoid for interactive displays and dynamic performances.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding MagicLab MagicBot X1

Height
180 cm
Weight
70 kg
DoF / joints
31

Intended applications

Commercial demonstrations, interaction and performance

02 / Hardware profile

MagicLab MagicBot X1 specifications

Category
Biped humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
180 cm
Weight
70 kg
Degrees of freedom
31
Use cases
Commercial demonstrations, interaction and performance

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact MagicLab for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

MagicLab MagicBot X1 engineering analysis

How should MagicBot X1's performance motions be measured?

MagicBot X1 is associated with staged interaction and dynamic demonstrations. The practical engineering questions are how its joints stay synchronized with audio, how it stabilizes while turning and whether the controller handles interruptions. A rehearsal-oriented performance does not establish the ability to perform unfamiliar household chores or carry industrial payloads.

Configuration and hardware details

01

Power continuity with a defined software boundary

The X1 specification lists two batteries with hot swapping, an Orin NX compute module and stereo vision. It gives 31 active DoF across the head, arms, waist and legs.

02

What to check before comparing

The checked table explicitly marks secondary development as unsupported. That distinction matters for anyone choosing a research robot. Hot swapping can reduce battery-change interruptions, but it is not evidence of maintenance-free operation around the clock.

Specification notes

The official page lists 70 kg body mass and an 18 Ah battery specification. A workload-specific endurance figure was not established.

Hands-on technical guide

MagicLab MagicBot X1: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from MagicLab for MagicLab MagicBot X1 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from MagicLab. No public installer or SDK is confirmed in this model's catalog record.

MagicLab MagicBot X1 workflow

  1. 01Order / accessMagicLab MagicBot X1
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from MagicLab. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Rehearse one approved motion sequence on a clear stage and validate operator pause and stop before public performance.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Only request a supported standing, walking or performance preset from the manufacturer. For a custom dance or run, obtain the exact joint model and validated controller, retarget motion in simulation, constrain joint position, speed, torque and contacts, then use vendor-supervised reduced-speed commissioning. No running or dance capability is implied by this procedure.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare MagicLab MagicBot X1 with similar robots

Catalog records with their original source dates
FieldMagicLab MagicBot X1MagicLab MagicBot Gen1AgiBot A3
Height180 cm174 cm173 cm
Mass70 kg70 kg55 kg
Recorded degrees of freedom314231 active DoF
Source date in record2026-09-202026-09-202026-10-07
Product sourceMagicLab MagicBot X1 documentationMagicLab MagicBot Gen1 documentationAgiBot A3 documentation

MagicLab MagicBot X1 is recorded as 6 cm taller than MagicLab MagicBot Gen1.

MagicLab MagicBot X1 is recorded as 7 cm taller than AgiBot A3.

Community ratings

MagicLab MagicBot X1 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

MagicLab MagicBot X1 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • MagicLab official product source (manufacturer)
  • Official manufacturer image (manufacturer)