All humanoid robots
Wheeled humanoidNot confirmed

UBTECH Robotics Cruzr S2

UR
UBTECH Robotics

China · Reviewed 2026-09-20

Cruzr S2 is UBTECH’s wheeled humanoid for mobile manipulation and interaction, using an adjustable body and dexterous hands.

Published offer

Price not verified

Availability: Not confirmed

01 / At a glance

Understanding UBTECH Robotics Cruzr S2

Height
176 cm
DoF / joints
44

Intended applications

Mobile manipulation, reception and service development

02 / Hardware profile

UBTECH Robotics Cruzr S2 specifications

Category
Wheeled humanoid
Commercial status
Listed by manufacturer
Availability
Not confirmed
Country of origin
China
Height
176 cm
Degrees of freedom
44
Use cases
Mobile manipulation, reception and service development

03 / Pricing and purchasing

Published offers and availability

No numerical offer recorded

Contact UBTECH Robotics for a written quotation for the exact configuration, including delivery, support and any software access fees.

04 / Technical analysis

UBTECH Robotics Cruzr S2 engineering analysis

What is the advantage of an adjustable wheeled body on Cruzr S2?

UBTECH Cruzr S2 combines wheeled movement with an adjustable upper body and manipulation equipment. Changing body height can extend the reachable shelf range but may alter stability and visibility near people. A wheeled robot can also require an exact docking position before interacting with a checkout counter or display rack.

Configuration and hardware details

01

Reach without a bipedal gait

UBTECH lists 176 cm height and 44 DoF. The adjustable column changes height by up to 40 cm, while the waist rotates through ±170 degrees. The page specifies a 15 kg dual-arm load and a workspace extending from ground level to 1.8 m.

02

What to check before comparing

A dual-arm load is not a single-hand rating. The page separately lists 7.5 kg for a hand grasp and 1 kg for a finger grasp. Check the object, reach and chosen handling mode before using those values for a service task.

03

Cruzr S2's variable height needs a reachable-workspace map

UBTECH describes Cruzr S2 as a wheeled humanoid platform with adjustable height and dexterous hands. The catalog's height and joint count describe a retained specification, but a changing torso position changes the reachable height and the load moment on its mobile base. A service demonstration should not be compared directly with biped stairs or free-standing balance.

For a visitor service or light manipulation pilot, draw the locations of all target shelves and work surfaces and test stops at their real positions. Record successful reaches, base repositioning, grip changes and any collision with the surrounding furniture. Confirm which navigation sensors, hand hardware and speech functions appear on the quoted unit; the general manufacturer homepage is not a substitute for a signed configuration sheet.

Specification notes

The product page publishes a speed up to 2 m/s. Body mass was not established in the checked sources.

Hands-on technical guide

UBTECH Robotics Cruzr S2: ordering, setup and first controlled test

Commissioning checklist; examples have not been tested on physical hardware by TechniaHQService.

What to order and verify
Catalog access: Not confirmed. Request a written quote or order confirmation from UBTECH Robotics for UBTECH Robotics Cruzr S2 with hardware revision, charger, controller, supported accessories, import/shipping costs, warranty, software entitlement and training. Do not treat a price listing as a delivery guarantee.
Software and equipment
Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from UBTECH Robotics. No public installer or SDK is confirmed in this model's catalog record.

UBTECH Robotics Cruzr S2 workflow

  1. 01Order / accessUBTECH Robotics Cruzr S2
  2. 02SoftwareManufacturer-approved package
  3. 03Initial checkRead-only diagnostics
  4. 04Acceptance testSupervised exercise
Conceptual workflow for the exercise below. This is an explanatory diagram, not an electrical wiring schematic or proprietary controller blueprint.

Step-by-step setup and first exercise

  1. 01

    Get the unit and files

    Use the manufacturer's sales or partner channel to confirm the serial configuration, supported software and contents of the delivery.

  2. 02

    Install the approved software

    Obtain the model-specific operator manual, controller application, firmware compatibility matrix and developer package from UBTECH Robotics. No public installer or SDK is confirmed in this model's catalog record. Install on the supported host OS and verify the release/build number. Do not use packages intended for another robot.

  3. 03

    Startup and stop check

    Follow the supplied power-on order; inspect battery, joints, cables and controller warnings. Verify the approved emergency stop and initial posture before allowing motion. Keep the test space clear.

  4. 04

    First exercise

    Confirm the S2 wheeled navigation and manipulator options; test a short reception route and stationary arm reach separately.

  5. 05

    Firmware and software updates

    Compare the current serial/model, controller and firmware versions against the manufacturer's release notes. Export configuration and logs and check recovery options. Obtain the correct signed package or managed update; use the specified power and network conditions. Test stop controls and the same acceptance exercise after updating. If no authorized firmware path exists, do not flash the robot.

  6. 06

    Walking, running and dancing

    Use the approved base-control or gesture interface. Biped walking and running do not apply to a stationary or wheeled platform; do not assume unsupported dance or gesture presets.

Troubleshooting

Controller cannot establish a connection
Verify the host OS, firmware compatibility, authorized account and network setup using the exact delivered manual; do not bypass safety or authentication.
Motion differs from the acceptance exercise
Stop using the approved control, record the exact fault and verify actuator/joint configuration and software revision before repeating.

Capabilities and limits

The acceptance exercise is a proposed commissioning check, not a measured performance result or proof of support for custom locomotion.

05 / Comparable models

Compare UBTECH Robotics Cruzr S2 with similar robots

Catalog records with their original source dates
FieldUBTECH Robotics Cruzr S2Galaxea Dynamics R1Galaxea Dynamics R1 Pro
Height176 cm170 cm170 cm
MassNot disclosed in the retained sourcesNot disclosed in the retained sourcesNot disclosed in the retained sources
Recorded degrees of freedom442426
Source date in record2026-09-202026-09-202026-09-20
Product sourceUBTECH Robotics Cruzr S2 documentationGalaxea Dynamics R1 documentationGalaxea Dynamics R1 Pro documentation

UBTECH Robotics Cruzr S2 is recorded as 6 cm taller than Galaxea Dynamics R1.

UBTECH Robotics Cruzr S2 is recorded as 6 cm taller than Galaxea Dynamics R1 Pro.

Community ratings

UBTECH Robotics Cruzr S2 Reviews & Ratings

Hands-on community feedback is moderated before publication. Technical sub-ratings are optional.

—

0.0(0 reviews)
5 star
0%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Published reviews

0 total

No published reviews yet

Be the first to submit hands-on feedback for moderation.

06 / References

UBTECH Robotics Cruzr S2 sources

Manufacturer descriptions and the cited specifications were checked on 20 September 2026. This profile does not report an independent hands-on test.

  • UBTECH Robotics official product source (manufacturer)
  • Official manufacturer image (manufacturer)